Hardware Connections - ZyXEL Communications 802.11g Wireless Ethernet Adapter 1-G-470 Quick Start Manual

Hardware Connections

Figure 1 The G-470: Rear Panel
The following table describes the rear panel of the G-470.
Label
1
2
3
4
Follow the steps below to install the G-470 in your computer.
1 Screw the antenna clockwise onto the antenna connector.
Make sure the antenna is securely screwed onto the
antenna connector.
2 Use an Ethernet network cable to connect your computer
to the ETHERNET port for Internet access.
3 Use the power adaptor provided with your G-470 to
connect an appropriate power source to the POWER
socket. Make sure the power source is on. Use only the
included power adaptor.
Description
Antenna connector
RESET button
ETHERNET port
POWER socket
3