Table of Contents
Advertisement
Light
WLAN
The light is on. The device is connected to the
The light is
blinking.
The light is off.
ETHN
The light is on. Ethernet is connected.
The light is
blinking
The light is off.
SYS
The light is off.
The light is
blinking orange.
PWR
The light is on. The power is on.
The light is off.
If any of these lights are not on, check your connections and
inspect your cables for damage. If the lights are still off,
contact your local vendor.
Internet Setup
You must first prepare your computer / computer network to
connect to the G-470 by setting up your IP address.
1 Click start (Start in Windows 2000/NT) > Settings >
Control Panel.
Description
wireless network.
The device is scanning for an
access point (AP).
The device is not connected to the
wireless network.
Ethernet is connected, and is
sending or receiving data.
Ethernet is not connected.
The device is ready.
The device is not ready, or is
rebooting.
The power is off.
6
Advertisement
Table of Contents
