Mercedes-Benz GLA Series Operator's Manual page 123

° Continuous wiping, slow
4
¯ Continuous wiping, fast
5
Turn the combination switch to the correct
#
position 1 - 5.
Single wipe/washing: push the button on
#
the combination switch in the direction of
arrow 1.
í Single wipe
R
î Wipes with washer fluid
R
Switching the rear window wiper on/off
1
ô Single wipe/washing
2
è Intermittent wipe
Single wipe: press button 1 to the point of
#
resistance.
Wiping with washer fluid: press button
#
beyond the point of resistance.
Light and visibility 121
Switching intermittent wipe on/off: press
#
button 2.
The è symbol will appear on the instru‐
ment cluster when the rear window wiper is
switched on.
Changing the windshield wiper blades
& WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windshield wipers
#
and the ignition before changing the
wiper blades.
Moving the wiper arms into the replacement
position
Switch the ignition on and switch off again
#
immediately.
1
Within around 15 seconds, press and hold
#
the î button on the combination switch