Mercedes-Benz GLA Series Operator's Manual page 109

Align parcel net 1 on cargo compartment
#
floor 3 so that strap 2 is positioned at
handle 4 and points upwards.
Pull rubber sections 5 and 6, over cargo
#
compartment floor 3 as shown.
Align parcel net 1 so that
#
Rubber section 5 runs underneath
R
recesses 7 and beads 8 on the left
and right are placed on the lower edge of
cargo compartment floor 3.
Rubber section 6 runs above handle
R
and beads 8 on the left and right are
Seats and stowing 107
placed on the lower edge of cargo com‐
partment floor 3.
% Ensure that the parcel net does not block
the locking mechanism of the cargo com‐
partment floor.
Close the cargo compartment floor.
#
Adjustable cargo compartment floor
The cargo compartment can be made larger or
smaller depending on requirements. To this end,
you can lock the cargo compartment floor at two
different heights. The higher position provides a
flat surface when the rear seat backrests are fol‐
ded forward. Furthermore, you can remove a
bracket at the rear to create additional space
lengthways.
4