Mercedes-Benz GLA Series Operator's Manual page 102

100 Seats and stowing
The driving characteristics of your vehicle are
dependent on the distribution of the load within
the vehicle. You should bear the following in
mind when loading the vehicle:
Never exceed the permissible gross mass or
R
the gross axle weight rating for the vehicle
(including occupants). The values are speci‐
fied on the vehicle identification plate on the
vehicle's B-pillar.
The load must not protrude above the upper
R
edge of the seat backrests.
Always use the partition net when transport‐
R
ing objects in the cargo compartment.
Always place the load behind unoccupied
R
seats if possible.
Secure the load using the tie-down eyes and
R
distribute the load evenly.
Stowage spaces in the vehicle interior
Overview of the front storage compartments
1 Storage space in the doors
2 Storage compartment in the armrest with a
multimedia and USB connection
3 Storage compartment in the front center
console with a USB port
4 Glove box
Through-loading feature in the rear bench
seat (EASY-PACK Quickfold)
Folding the rear seat backrest forwards
& WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant.
When adjusting a seat, make sure that
#
no one has any body parts in the sweep
of the seat.
& WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back‐
rest may fold forwards, even when you are
driving.
As a result, the vehicle occupant will be
R
pushed into the seat belt with increased
force. The seat belt will not be able to