Storing Stations In Memory - JVC KD-S9R Instructions Manual

3
Tune into a station you want while
"MANU" is flashing.
Press
stations of higher
frequencies.
Press
stations of lower
frequencies.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM – MW/LW) until
you release the button.
When an FM stereo broadcast is hard to
receive:
Press MO RND (monaural/random) while
listening to an FM stereo broadcast.
• Each time you press the button, the MONO
indicator lights up and goes off alternately.
MO
RND
When the MONO indicator is lit on the display,
the sound you hear becomes monaural but the
reception will be improved (the STEREO
indicator goes off).
¢ to search
4 to search
Lights up when receiving an
FM broadcast in stereo.

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
1
Select the FM band (FM1 – 3) you want
to store FM stations into.
• Each time you press the button, the FM
band changes as follows:
FM
(FM1)
2
Press and hold both buttons for more
than 2 seconds.
SSM
"SSM" appears, then disappears
when automatic preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
F1 F2 F3
(FM2) (FM3)
7