7. Submerge the suction probe in water and wash it by
hand if dirty. Rinse it properly by submerging it in water.
8. Use a spray bottle to spray the dispensing nozzles of the
water faucets with a mild bleach solution (1 teaspoon of
unscented bleach in 12 oz of water).
9. After 1 minute, rinse by spraying the nozzles with tap
water.
10. Prepare a solution in an empty bottle with 3 gallons of
water and 16 oz of white vinegar or 3 oz of unscented
bleach.
11. Install this bottle into the cooler and close the door.
12. Dispense 1 Gallon of water from both faucets.
13. Remove the bottle with the cleaning solution.
14. Install a bottle filled with plain tap water.
15. Dispense 1 gallon of water from both faucets.
16. If a vinegar or bleach smell is still present repeat the rins-
ing cycle.
17. Drain water through the drain plug at the back as de-
scribed before.
18. Replace the drain plug.
19. Place in your bottled water. Place the suction probe into
the bottle.
20. Close the door and plug the power cord into a wall outlet.
Rinsing the Brew Pot and Filter Basket
1. Open lid and lift brewing,
pot, rinse well.
20
2. Lift drain basket, rinse
well.
Stainless Steel
tube for Self - Clean
function
Expandable telescopic
tube for drawing water
from the bottle