T
he Sea Vision SV 10 model
offers the largest aperture of
all the fiberglass models giving
maximum light output from the 150
watt HID metal halide lamp. It can
be installed in the transom or the
hull and is suitable for boats with
110-230 volt AC power, includ-
ing sportfish, yachts and cruisers.
The vessel must be hauled out for
installation although lamp change
and any maintenance can be done
in the water from within the hull.
Application for:
GRP/fiberglass/wood hulls
———————————————————————
Lamp:
150 watt HID metal halide
———————————————————————
Life length:
approx. 3,000 hours plus
———————————————————————
Lumens:
12,000
———————————————————————
Kelvin colour temp: 7500
———————————————————————
Glass lens:
Borosilicate glass
Thickness:
12.7mm / 0.5"
Diameter:
58mm / 2.3"
———————————————————————
Power supply:
120 VAC 50/60Hz input -
running current 1.33 amps
230 VAC 50/60Hz input -
running current 0.59 amps
———————————————————————
Casing material:
Marine Bronze / Marine Aluminum
Dimensions:
Flange diameter: 130 mm (5.12")
Body length: 203 mm (8.0")
———————————————————————
Angles available: Flush
———————————————————————
Weight:
3.5 Kgs /8 lbs
———————————————————————
Code:
SV10
———————————————————————
SV10 technical specifications
Ballast:
———————————————————————
Weight:
———————————————————————
Cable:
———————————————————————
Total shipping weight: 5.3 Kg/14 lbs
———————————————————————
Installation:
This is a guideline only, for specific requirements please contact us.
———————————————————————
Note: Please specify voltage when ordering.
All information is subject to change without prior notice,
please confirm details prior to ordering.
3406 SW 26th Terrace, C-6/7, Fort Lauderdale, FL 33312 USA
T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261
sales@seavision.com www.seavision.com
SV10-150W
SV10-150W
SV18
120 VAC 50/60Hz
230 VAC 50/60 Hz
1.9 Kg / 5 lbs
Only required between the light and ballast
(maximum distance 50 feet / 15 meters).
High temperature silicone, 18/3 shielded
copper wire. Normal ships cable can be used
from the ballast to the power supply.
Recommended at minimum 10" (250mm) below
light load waterline between 3 - 8 feet
(1-2.5 meters) apart.
(100mm) 4" cut out hole
USCG Ignition Protected
Patent Pending