Operation Instructions; Operation Modes - Emerson Quiet Kool 21 SEER Series Installation Manual

Operation instructions

Operation modes

Selecting mode
Each time MODE button is pressed, the operation mode
is changed in sequence:
COOLING DRY
Heating mode is NOT available for cooling only air conditioner.
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
Auto Higher
At "FAN ONLY" mode, the "Auto" is not available.
At "DRY" mode, Fan speed is set at "AUTO" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to raise temperature setting by
Press once to lower temperature setting by
Range of available set temperature
*HEATING, COOLING
DRY
FAN ONLY
Note: Press and hold " MODE" button and "
together for 3 seconds will alternate the temperature display
between the ℃ and °F scale.
Note: Heating mode is NOT available for cooling only models.
Note: At "Dry" mode, the unit can decrease or rise 7°F by remote
controller if you feel uncomfortable.
Press button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER ON, TIMER OFF, CLOCK,
will be specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2－5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
FAN ONLY HEATING
FAN mode
High Low
Medium
61°F ~ 86°F(16 ℃
-7 ~ 7
unable to set
Turning on
Lower
1°F or 1℃.
1°F or 1℃.
℃
~30 )
" button
8° HEATING, SLEEP and SUPER operation modes
3
8
ON ON
OFF OFF
ON/OFF
MODE FAN
1
SWING SLEEP SUPER
SMART
IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
MUTE 8
SWING HEAT
3