Remote Controller - Emerson Quiet Kool 21 SEER Series Installation Manual

Remote controller

Remote controller
The remote controller transmits signals to the system.
ON/OFF BUTTON
1
The appliance will be started when it is energized or will be
stopped when it is in operation, if you press this button.
2 MODE BUTTON
Press this button to select the operation mode.
3 FAN BUTTON
Used to select fan speed in sequence
auto, higher, high, medium, low or lower.
ROOM TEMPERATURE
4 5
SETTING BUTTONS
Used to adjust the room temperature and
the timer, also real time.
6
SMART BUTTON
Used to enter fuzzy logic operation directly,
regardless of the unit is on or off.
SLEEP BUTTON
7
Used to set or cancel Sleep Mode operation.
SWING BUTTON
8
Used to stop or start vertical adjustment louver swinging
and set the desired up/down airflow direction.
IFEEL BUTTON
9
Used to set IFEEL mode operation. Press it once,
the IFEEL function will be started. Press it again,
the IFEEL function will be shut off.
CLOCK BUTTON
10
Used to set the current time.
11 12
TIMER ON/OFF BUTTON
Used to set or cancel the timer operation.
13
SUPER BUTTON
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
61°F(16 set temp automatically ; Fast heating
℃)
operates at auto fan speed with 86°F(30
temp automatically.)
Indication symbols on LCD:
Cooling indicator Dry indicator
Auto fan speed Higher fan speed
Lower fan speed
Sleep 1 indicator
Smart indicator
Super indicator
Ifeel
Note: Each mode and relevant function will be further specified in following pages.
set
℃)
Fan only indicator
High fan speed
Sleep 2 indicator
Mute indicator
Display temperature
1
ON/OFF
3
2
8
MODE
6
SWING
12
SMART
15
TIMER ON TIMER OFF
SWING
DIMMER BUTTON
14
When you press this button, all the display of
indoor unit will be closed. Press any button to
resume display.
SWING BUTTON
15
Used to stop or start Horizontal adjustment
louver swinging and set the desired left/right
airflow direction.
MUTE BUTTON
16
Used to stop or start MUTE Mode operation.
Fan speed is automatically set at lower fan speed.
8 ° HEAT BUTTON
17
Used to set 8° heating mode.
8 Heating indicator
8
Medium fan speed
Sleep 3 indicator
Signal transmit
1
8
ON ON
OFF OFF
FAN
SLEEP SUPER
IFEEL DIMMER
CLOCK
8
MUTE HEAT
Heating indicator
Low fan speed
Sleep 4 indicator
Display set timer
ON
OFF
Display current time
4
5
7
13
9
14
11
10
16
17