Berger & Schroter 31881 Manual page 21

Working Mode
Switch the Mode Button to "On". After turn on the camera,the screen
will display 15 seconds countdown. Then the LEDs and screen will go
out. The camera begins to operate independently and enter standby
mode.
If the wild animals enter the detection range of the motion sensors , the
camera will be activated and detect the motion trail.
If the wild animals continue to move to the detection zone of the sensor,
the camera will take photos or record video automatically.
When the wild animals leave the detection zone of the sensors , the
camera will be deactivated and turn back to standby mode.
Night Mode
In night mode,the pictures just can display white and black.
When record a video for long time in the evening, the low voltage may
have a great influence on the stability of the machine. Do not record
video with low voltage in the evening.
Using the wall bracket
You can mount the camera on a wall or tree by the supplied wall
bracket. Before mounting the wall bracket you should ensure that all
existing screws are tight.The best installation height distance from the
ground about 1 meter.
Components
1.Tripod screw
2 Lock nut
3 Pivot bolts
4 Drill holes
5 Hexagonal screw
6 Wall plugs
7 Screws
21