Table of Contents
Advertisement
Available languages
Available languages
Reset settings
Restore the camera to factory default settings including password,serial
number and so on.
Options: On / Off.
Version
Look up the Firmware information of the camera.
Take Photos, Record Video, Playback
Switch the Mode Button to "Test". In this mode,you can take photos,
record video and playback files manually.
• Take Photos: Press Capture button to switch to photo mode. Press
Shot button to take a picture.
• Record Video: Press Video button to switch to video mode.Press Shot
button to start to record a video clip. Press Shot button again to stop
recording.
• Playback: Press Playback button to enter the playback interface. Press
Up/Down button to scan photos or video. When playback video, press
OK button to play the video. Press OK button again to have a pause.
Press Menu button to stop playback. Press Playback button again to
exit the playback mode.
Playback Menu:
1) Delete current file: Delete the current photo or video.
Options: Cancel / Delete.
2) Delete all files: Delete all photo and video files in the memory card.
Options: Cancel / Delete.
3) Activate slide show: Playback the photos in slide way. Each photo
display 3 seconds. Press OK button to stop playing.
4) Write protect: Lock the file. It can avoid accident deletion.
Optio: Write-protect current file / Write-protect all files / Unlock current
file / Unlock all files.
20
Advertisement
Table of Contents
