Related Manuals for Federal Signal Corporation Vibratone 350WBX
Summary of Contents for Federal Signal Corporation Vibratone 350WBX
- Page 1 Model 350WBX Vibratone Horn ® for Hazardous Locations Installation Manual 2561443B français....page 11 REV. A 313 español....página 21 Printed in U.S.A.
- Page 2 Warranty – Seller warrants all goods for five years on parts and 2-1/2 years on labor, under the following conditions and exceptions: Seller warrants that all goods of Seller's manufacture will conform to any descriptions thereof for specifications which are expressly made a part of this sales contract and at the time of sale by Seller such goods shall be commercially free from defects in material or workmanship.
-
Page 3: Table Of Contents
Contents Safety Messages to Installers ............5 Unpacking the Product ..............6 Product Specifications..............6 Installing the Model 350WBX ............7 Changing the Fuse ................9 Getting Technical Support and Service ........... 9 Returning the Product for Credit ............. 9 Tables Table 1 Audibility and Electrical Ratings .......... - Page 4 Vibratone is a registered trademark of Federal Signal Corporation. © 2013 Federal Signal Corporation...
-
Page 5: Safety Messages To Installers
Installation Instructions Safety Messages to Installers The installation, maintenance, and disposal of this product must be carried out in accordance with national codes and standards. It is important to follow all instructions shipped with this product. This device is to be installed by a trained electrician who is thoroughly familiar with and will follow all applicable national and local codes in the country of use. -
Page 6: Unpacking The Product
Installation Instructions • File these instructions in a safe place and refer to them when maintaining and/or reinstalling the device. Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death. EXPLOSION HAZARD—Substitution of components may impair suitability for Class I, Division 2, Groups A, B, C and D;... -
Page 7: Installing The Model 350Wbx
Installation Instructions Installing the Model 350WBX In all installations, it is recommended that the electrical wiring to the installation site be completed before the horn is mounted. Installations are subject to national and local electrical and fire codes and standards. The 350WBX is gasketed and has two 3/4-14 NPT and one 1/2-14 NPT tapped openings to accommodate supply connections. -
Page 8: Figure 2 Ac Wiring Diagram
Installation Instructions 3. Attach the supply wires to the terminal block as shown in Figures 2 and 3. The terminal block is capable of accepting both solid and stranded wire within the range of 10 AWG (5.27 mm ) to 20 AWG (0.52 mm When using stranded wire, ensure that the strands of the wire are twisted together before inserting them into the terminal block. -
Page 9: Changing The Fuse
Installation Instructions Changing the Fuse To change the 1 A fuse, see Figure 4. Figure 4 Fuse installed in terminal block 1 AMPERE 5 x 20 mm FUSE 290A7161 Getting Technical Support and Service Products returned for repair require a Return Authorization form. To obtain repair service or technical assistance for the product, call Federal Signal at 708-534-4756 or 877-289-3246. - Page 10 Installation Instructions • Product is a standard product • Product is not a service part All returns are subject to a re-stock fee. Defective products that are returned within the warranty period will be repaired or replaced at Federal Signal’s sole discretion. Defective products do not include those products with lamp failure.
Need help?
Do you have a question about the Vibratone 350WBX and is the answer not in the manual?
Questions and answers