La Crosse Technology 308-179ORV2 Faqs page 11

1. Hold the SET button to select Beep ON/OFF. Press SET to confirm and move to beep
sound ON/OFF. BEEP ON will show. ON flashes. Press the + or - button to turn the
button beep sound off.
2. Press SET to confirm and move to 12/24 hour. The 12Hr will flash. Press the + or -
button to choose 12 hour or 24 hour time format.
3. Press SET to confirm and move to the hour. The HOUR will flash. Press the + or -
button to choose the hour.
4. Press SET to confirm and move to the minutes. The MINUTES will flash. Press the + or -
button to choose the minutes.
5. Press SET to confirm and move to the year. 2020 will flash. Press the + or - button to
change the year.
6. Press SET to confirm and move to the month. The Month number will flash. Press the +
or - button to change the month.
7. Press SET to confirm and move to the date. The Date number will flash. Press the + or -
button to change the date.
8. Press SET to confirm and move to Month/Date or Date/Month format. M/D will flash.
Press the + or - button to change to D/M.
9. Press SET to confirm and move to the temperature unit. °F will flash. Press the + or -
button if you prefer °C (Celsius).
10. Press SET to confirm and exit.
Temperature station is dim
Explanation: Most temperature stations have a gray background. Place the temperature
station at eye level, to determine if it is dim. Temperature stations that sit in the sunlight
can develop a cloudy film over time.
• This is generally a power related issue.
Batteries may be overpowered or underpowered. Remove batteries from temperature
•
station.
• Press any button 20 times. Leave the temperature station unpowered for 1-2 hours.
• Install fresh alkaline batteries with correct polarity.
Temperature station has distorted or frozen display
Explanation: On a brand new temperature station, check for thin plastic film of printed
scratch guard that may be on the screen of the temperature station. This thin piece of
plastic has printed numbers for store displays. When the batteries are installed, the "real"
numbers show behind the printed scratch guard and create distortion.
• With all power removed, the temperature station should be blank.
• If numbers still appear, please check for scratch guard.
Power:
• Check that the batteries are installed correctly.
• This is generally a power related issue.
Batteries may be overpowered or underpowered.
•
• Remove batteries from temperature station.
• Press any button 20 times. Leave the batteries out of the display for 2 hours.
• Insert batteries into the temperature station.
La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 11