Operation - Renkforce 1588385 Operating Instructions Manual

Operating instructions
Adapter plug with motion sensor
Item no. 1588385
Intended use
This product is designed to switch on a connected appliance with a PIR motion sensor.
The adapter plug must be connected to an earthed mains socket that delivers a mains voltage of
220–240 V/AC, 50/60 Hz. The socket on the plug adapter is designed to power an appliance with a power
rating of up to 1200 W.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms)
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe
place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Delivery contents
• Adapter plug with motion sensor
• Operating Instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR code on this
page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The icon with an exclamation mark in a triangle is used to highlight important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety instructions and information on proper handling in this manual, we will assume no
liability for any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair
centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Electrical safety
• This product may only be used in dry, enclosed, indoor areas. It must not become damp or
wet! Never place the product in the direct vicinity of a bathtub, shower, bathroom, swimming
pool or other source of moisture. This may result in a fatal electric shock!
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated may destroy the product. Allow the product to reach room
temperature before connecting it and putting it to use. This may take several hours.
• Never pour any liquids over electrical devices or place objects filled with liquid next to the
product. If liquid or an object does enter the interior of the device, power down the respective
socket (e.g. switch off the circuit breaker), and then remove the mains plug from the mains
socket. Discontinue use and take the product to a specialist repair centre.
• Before connecting the product to the mains, make sure that your local AC mains voltage
matches the specifications on the nameplate.
• This device was constructed according to protection class II. Only connect the adapter plug to
a standard mains socket (230 V/AC, 50 Hz) connected to the public grid.
• The mains outlet must be located near to the adapter plug and be easily accessible.
• Always use the grips on the side of the plug to unplug the adapter from the mains socket.
• Unplug the mains plug from the mains socket if you do not plan to use the product for an
extended period of time.
• For safety reasons, disconnect the mains plug from the mains socket during thunderstorms.
• Never insert or unplug the mains plug when your hands are wet.
• This product is not intended to be used by people (including children) with impaired physical,
sensory or mental capabilities or lack of experience and/or lack of knowledge unless they are
supervised by a person responsible for their safety or have received instructions on how to
use the product.
• Keep the product out of the reach of children under 8 years of age.
• Children must always be supervised by an adult to ensure that they do not play with the
product.
Product overview
4
5
3
6
2
7
8
1

Operation

• Insert the adapter plug into a properly earthed mains socket (wall socket). The LED (8) will turn on to
indicate that the adapter plug is connected to the mains.
• The socket (1) on the front of the adapter must be underneath the PIR sensor (6).
• Connect the desired appliance to the socket (1) on the adapter plug.
Do not point the PIR sensor (6) at radiators, lights or objects with varying temperatures (e.g.
electronic equipment), as this may cause the sensor to be triggered unintentionally. In addition,
do not point the PIR sensor (6) at objects that may move due to the flow of air. The motion sensor
does not detect temperature changes through glass.
• Move the on/off switch (7) to the "ON" position to switch on the socket (1) on the adapter plug. The adapter
plug will power the connected appliance.
• To switch off the socket (1) on the adapter plug, move the on/off switch (7) to the "OFF" position. The power
supply to the connected appliance will be switched off.
• Move the on/off switch (7) to the "AUTO" position to switch on the socket (1) automatically when movement
is detected.
• To disable motion detection, move the on/off switch (7) to the "ON" or "OFF" position.
• After connecting the adapter plug to a mains socket, it takes approximately 30 seconds for the PIR sensor
to adjust to the background temperature and recognise changes in temperature within the detection range.
• Depending on the activation brightness (3–2000 lx), the adapter plug switches on the connected appliance
when the PIR sensor detects a change in temperature within the detection range.
• If the PIR sensor does not detect any change in temperature during the preset switch-off duration
(10 seconds to 7 minutes), the connected appliance will be automatically switched off. If a change in
temperature is detected during the preset switch-off duration, the timer will be automatically reset.
- Example: The switch-off duration is set to 5 minutes. The appliance has been switched on for 4 minutes
and 30 seconds when another change in temperature is detected. The appliance will stay switched on
for an additional 5 minutes and 30 seconds.
Features of the PIR motion sensor
The PIR sensor in the adapter plug reacts to changes in temperature, e.g. when a person or animal enters
the detection range whose temperature is different from the ambient temperature.
To ensure optimal detection, the adapter plug should be placed so that the object does not move towards the
PIR sensor, but rather from left to right (or vice versa) across the detection range.
The detection range is determined by several factors:
- The adapter plug's installation height
- The difference between the temperature of the moving object and the ambient temperature
- The size of the object
- The distance of the object from the adapter plug
- The direction and speed of the movement
- Ambient temperature
1 Socket
2 Mains plug
3 SENS control
4 TIME control
5 LUX control
6 PIR sensor
7 On/off switch (hidden)
8 LED