"Sensorsteam" Function; Steam Settings - Bosch Sensixx’x TDi90 EasyComfort Operating Instructions Manual

"i-Temp" technology
This technology sets an appropriate combination of
temperature and steam, which is suitable for all fabrics that
can be ironed (symbols
The "i-Temp" technology does not apply to fabrics that
cannot be ironed (symbol
Please check the garment care label for details or try ironing
on a part of the fabric not visible normally.

3. "SensorSteam" function

After the initial heating, "SensorSteam" function switches off
the iron when it is left unattended, thus increasing security
and saving energy.
While the handle is gripped, the iron heats up. The
1
"SensorSteam" indicator lamp (2) will remain lit
continuously.
2 When the handle is released, the "SensorSteam"
function is activated. The "SensorSteam" indicator lamp
(2) will lash.

4. Steam settings

This iron generates steam by means of a built-in motor. While
the motor is working, the "MotorSteam" indicator lamps (14)
of the water tank come on.
The iron is equipped with a sensor and an electronic system
to adapt the amount of steam to the mode of use, optimising
both the ironing and the service life of the appliance.
The steam mode can be selected by pressing the "SET"
button (3) successively. The iron runs through the following
cycle:
Steam mode
Medium
(continuous steam)
Maximum
(continuous steam)
Dry ironing
(ironing without steam)
Steam production can be controlled manually for steam
ironing only when necessary. Select dry ironing mode and
press the motor activation trigger (1).
).
).
Indicator lamp (4)
"eco"
(green)
"max"
(red)
off
17
B OS CH