Table of Contents
Advertisement
Factory
Manufacturer password
Insert manufacturer
z000
password(PWS):
Factory Save
Save?
No
Restore?
No
Auto Restore?
No
Factory Delete
CLEAR ALL SAVED DATA
FACTORY+USER
No
20
VGN Technology
M
P
ANUFACTURER
ASSWORD
In order to edit any of the factory parameters, the user must first provide the
manufacturer-provided password. Contact the factory for further assistance.
I
NITIALIZATION
The software includes a set of default parameters to configure the controller.
However, once the controller is configured for a specific fan system, it is beneficial
to save the 'as shipped' configuration in case changes are made in the field.
Save is used to store the editable parameters to non-volatile memory. Press enter
to advance the cursor. Then press the arrow buttons to toggle the selection to
YES. Press enter. The value will automatically return to NO after a few seconds.
Restore is used to retrieve the factory settings from memory and overwrite the
current configuration.
Auto Restore is not used and should remain as NO.
Though almost never used, the Factory Delete feature allows the current
configuration to be erased. The resulting configuration is the software default
configuration which MUST be edited to match the fan model and size.
®
Advertisement
Table of Contents
