Using The Flash Off-Camera; Change Settings - Profoto A10 User Manual

Using the flash off-camera

The A10 unit is easy to use also as an off-camera flash unit as it has a
built in radio transceiver (AirTTL). The transmitting unit in the camera
hot shoe can be either an A10 unit or an Air Remote.
1. On the transmitting unit in the camera hot shoe, enable Air and
set channel.
2. On the off-camera unit, enable Air and set channel to the same as
on the transmitting unit.

Change settings

All settings are easily accessed in the settings menu.
For detailed information about the different settings, see the sub-
sequent sections.
1. Push the settings button [14] to display the settings menu.
2. Turn the dial [13] to select (highlight) a setting.
3. Press the settings button [14] to display the options menu for the
selected setting.
4. Turn the dial [13] to change the setting option.
5. Press the settings button [14] to choose option and return to the
settings menu.
6. Select the left arrow at the top of the settings menu to return to
the main menu, or press any other button.
Air Group
The group setting (A-F) applies to the A10 flash.
The selected group is shown in the top of the display [9].
Air Channel
The air channel setting applies to the A10 control unit and the A10 flash.
The selected channel is shown in the top of the display [9].
Air
The Air setting is used to activate/deactivate the built-in Profoto Air
transceiver.
www.profoto.com
29