Sony PCM-D100 Help Manual page 334

Help Guide | Messages list
linear PCM recorder.
Built-In Memory needs to be formatted / Memory Card needs to be
formatted
The linear PCM recorder cannot operate with the built-in memory or a memory card that
has been formatted by other devices. Format the built-in memory or the memory card
using the formatting function in the Settings menu of the linear PCM recorder. Do not use
your computer to format the built-in memory or the memory card.
(See "Formatting the memory
Process error
A process error has occurred. Remove the batteries or the AC adaptor to turn off the
linear PCM recorder completely, and then turn on the linear PCM recorder again.
If this message appears again, consult a qualified Sony repair engineer (see the
warranty for contact information).
Stop and Reinsert Memory Card
A memory card was inserted during recording or playback. Remove the memory card and
insert it when the linear PCM recorder is in the stop mode.
Set Date&Time?
The clock is not set. Set it before operating the linear PCM recorder.
(See "Setting the
No file
There is no file in the selected folder.
No Track Marks
There are no track marks for the selected file. You cannot execute those menu commands
to erase track marks or divide a file at all track mark positions.
File Protected
The selected file is protected or is a "Read only" file. You cannot erase it. Cancel the
protection on the linear PCM recorder or cancel "Read only" on your computer to edit the
file using the linear PCM recorder.
(See "Protecting a
Unknown data
This data format is not supported by the linear PCM recorder. The linear PCM recorder
supports DSD(.dsf/.dff)/LPCM(.wav)/MP3(.mp3)/WMA(.wma)/AAC-
file:///C/...ers/1000025409/Desktop/HTML_PDF%20Files/Help_4475418131_PCMD100_EN/4475418131.w/en/contents/TP0000226063.html[8/1/2019 8:23:38 AM]
(Format).")
clock.")
file.")
329