Sony PCM-D100 Help Manual page 156

Help Guide | Recording a few seconds in advance (pre-recording)
2. Press
"Pre-Recording" is set to "OFF" by default.
3. Select a folder.
4. Press the
The linear PCM recorder enters the recording standby mode.
Pre-recording starts, and sounds for a maximum of the last 5 seconds are buffered in
the memory. (
5. To start recording, press the
Recording mode standby is released, and recording continues from the sound
buffered in step 4.
6. To stop recording, press the
Note
If you start recording with pre-recording function using the built-in microphones, a click
noise may be recorded when you press the
an external microphone to record with pre-recording function.
When the remaining available recording time is less than 10 seconds, the pre-recording
function is disabled. Before using the pre-recording function, erase unwanted files.
If you stop recording before step 5, sounds buffered in the memory are not saved.
file:///C/...ers/1000025409/Desktop/HTML_PDF%20Files/Help_4475418131_PCMD100_EN/4475418131.w/en/contents/TP0000225956.html[8/1/2019 8:20:32 AM]
or to select "ON," and then press the
REC button.
shows how long the sound is buffered in the memory.)
PAUSE (or ) button.
STOP button.
button. We therefore recommend using
button.
151