AEG MC 4445 DVD Instruction Manual page 56

English
56
Password
If you'd like to secure your DVD-Player with a child lock you have to
attribute a password first. The password protection saves your child lock
settings so they can be modified only by you. To change the password,
you have to enter the current password.
The default password is "0000".
NOTE:
Remember your password. Without this password you can no longer
change the child protection function.
To change the password, proceed as follows:
1. Enter the current password using the Numerical Buttons (Fig. 2/31)
on the remote control.
To avoid the password being read by unauthorized persons, only
the characters "XXXX" appear on screen.
2. Confirm your entry by pressing ENTER (Fig. 2/16).
3. Now enter your new password with the Numerical Buttons (Fig.
2/31) on the remote control.
Rating (child protection)
Some DVDs contain information concerning the target group. At this,
the procedure is similar to the release of cinema films. (e.g. "released for
age 12").
If the child protection option is enabled the respective information (if
existing) will be read from the DVD and compared to the value preset
by you. If a DVD is intended for a higher age group than the one preset
by you the DVD cannot be played back. The following child protection
options can be chosen:
1 G: Suitable for children.
2: Suitable for all age groups.
3 PG: Parental supervision is recommended. Some passages might
be inappropriate for children.
4 PG 13: Parental supervision is strongly recommended. Some
passages can be inappropriate for children under the age of 13.
5: Parental supervision is necessary.
6 R: Youths under 17 may watch the movie only under supervision
of an adult.
7 NC17: Children and adolescents under 17 must not watch the
movie.
8: The film is to be watched only by adults.
Factory Settings
Select "Default/ Reset" if you want to reset the device to the factory
settings.
All of your own settings will be lost.