10-Installation - Haier HW120-B14876 User Manual

10-Installation

10.1 Preparation
Take the appliance out of the packaging.
keep them out of childrens reach. While opening the package, water drops may be
seen on plastic bag and porthole. This normal phenomenon results from water tests
in the factory.
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environmen-
tally friendly manner.
1.
R7
R8
I1
T1
T3
26
10.2 OPTIONAL: Install noise reduction pads
2.
10.1
cium-plastic board (Fig. 10-1). The board is used for
reducing noise after covering the bottom of the cabi-
net
1. Lay the washing machine down to its side, porthole
pointing upwards, bottom side towards operator and
3.
2. Place the calcium-plastic board.
Screw the bolts through the four holes on the board
again.
10.3 Dismantle the the transportation bolts
10-2
The transport protection on the rear side is designed
R5
R6
for clamping anti-vibration components inside the ap-
pliance during transportation to prevent inner damage.
All elements (I, R, S and T, Fig 10-2) must be removed
before use.
1. Remove all 4 bolts (T1 - T4) (Fig. 10-3)
10-3
T2
T4
EN
-