Troubleshooting - Dirt Devil REBEL26 Instruction Manual

18
Cleaning the exhaust filter
CAUTION!
The fine fins on the exhaust filter are sensitive.
Never clean the fins with water and only ever use
soft brushes for cleaning.
NOTE:
Replace any damaged, very heavily soiled, dis-
coloured or deformed exhaust filters with new
ones.
Press both keys to release the exhaust filter cov-
1
er and flip the exhaust filter cover away towards the
rear (Fig. ). Remove the exhaust filter by pull-
21
2
ing on the catch (Fig. 22
haust filter. Carefully clean the exhaust filter with
4
a soft brush (Fig. ).
23
5
into its console on the appliance.
haust filter cover into its bottom opening first, and
then flip it up so that you hear and feel it click into
place (Fig. ).
24
Cleaning the mini turbo brush (optional)
Disconnect the mini turbo brush from the suction
1
hose or the telescopic tube.
ing ring by turning it anti-clockwise (Fig.
fully open up the top of the housing of the mini tur-
bo brush (Fig. ). Thoroughly clean the brush by
25
4
hand. In case of stubborn soiling, carefully use twee-
zers or scissors (Fig. 26 ).
ing on the 3 tabs on the bottom of the housing and
then carefully close the top of the housing (Fig.
Screw the retaining ring back on by turning it
6
clockwise (Fig. 27 ).
Accessory parts and spare parts
• Filter set (1 exhaust filter +1 motor filter) – 2226022
(Fig. 28 /A)
• Parquet brush – M203-5 (Fig.
• Mini turbo brush "Fellino" – M219 (Fig.
• Midi turbo brush – M221 (Fig.
• Long flexible crevice nozzle – M232 (Fig.
• Hard floor nozzle – M236-1 (Fig.
). Carefully tap out the ex-
3
Re-insert the exhaust filter
Insert the ex-
6
Unscrew the retain-
2
25 ).
3
Place the top of the hous-
5
27
/B)
28
/C)
28
/D)
28
28 /E)
/F)
28
EN

Troubleshooting

Before you contact our Dirt Devil service team or
send the appliance to the Dirt Devil customer service
department, you will find a lot of additional informa-
tion in the service area of our website which will help
you solve problems.
www.dirtdevil.de/service
!
WARNING!
Always switch off the appliance and disconnect
it from the mains socket before starting trouble-
shooting. Never use a faulty appliance.
Care-
).