This sensor is not a safety sensor and is not to be NPN types used for the protection of Connection: cable 2000mm, 3 x0.25mm LV462.4/2 50118402 persons. Connection: cable 150mm with M8 connector, 4-pin LV462.4/2X-150-M8 50118403 LV462 - 01 2012/05...
- Changing the switching threshold PRG: Sensor setting - Sensor setting ADJ: Change switching threshold RUN: Normal mode Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 LV462 - 01 info@leuze.com • www.leuze.com...
Page 4
Menu-driven sensor setting The LV462 can be adjusted to meet customer requirements with a simple menu-driven system. To do this, set the selector switch for the operating mode to position PRG. Direction of movement in the menu...
Example: A switch-off delay of 100ms is to be set 1. Select " switch-off delay" time function: 2. Select "100ms" delay time: Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 LV462 - 01...
Page 6
Button +: The switching threshold in the display is decremented by 1 digit each time the button is pressed. If a button is kept pressed, the value in the display is continuously changed in steps of 10. LV462 - 01 2012/05...