Front Panel - Zenith XBS245 Installation And Operating Manual

Front Panel

POWER
Switches the DVD+VCR ON and OFF.
LINE2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an
external source (Audio system, TV/ Monitor,
Another VCR).
Disc Tray (DVD deck)
Insert a disc here.
RADIO (AM/FM)
Selects Radio operation
mode.
CH/PRESET (v/V)
Scans up or down through
memorized channels or radio
frequencies (stations).
Remote Sensor
Point the DVD+VCR remote control
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast forward picture search.
DVD: Go to beginning of current chapter/track or to previous chapter/track.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
TUNING (v/V)
Scans an available channel in
the area.
COPY/MEMORY
Press to copy a DVD
in the DVD deck to a
VCR tape in the VCR
deck.
Memorizes currently
tuned Radio frequency
(station).
Insert a video cassette here.
Display window
Shows the current
status of the
DVD+VCR.
OPEN/CLOSE
Opens or closes
the disc tray.
between the DVD deck
here.
Press and hold for a fast reverse search.
Ejects the tape in the VCR deck.
Adjusts volume of speakers.
PAUSE/STEP (X/C)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
Stops playback.
PLAY (N)
To play back a recorded tape.
REC/ITR (z)
To record normally or
to activate Instant
Timer Recording.
Cassette Compartment
(VCR deck)
DVD/VCR
Toggles control
and the VCR deck.
FORWARD (>/M)
BACKWARD (./m)
EJECT
VOLUME
STOP (x)
7