Warranty - Hendi BAIN-MARIE KICHEN 238905 User Manual

Faults
Fault
Appliance does not do
anything
Appliance does not do
anything
Appliance does not reach
the set temperature..
1) Reset overload circuit breaker
• Remove the plug from the power socket.
• Allow the Bain marie to cool down.
• After cooling down put the plug in the power sock-

Warranty

Any defect affecting the functionality of the appli-
ance that becomes apparent within one year after
purchase will be corrected by free repair or replace-
ment provided the appliance has been used and
maintained in accordance with the instructions and
has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is
claimed under warranty, state where and when it
Discarding & Environment
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
Symptom
green switch light does
not light and the green
control light does not light
green control light does
not light
green control light does
not go out
Cause
No power at the power
point
Overload circuit breaker
tripped
Thermostat defective
Element defective
et and turn the switch on.
• The Bain marie is now ready to be used again.
was bought and include proof of purchase (f.e. re-
ceipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.
Possible solution
Check the electrical
installation
Reset the overload circuit
breaker ( 1 )
Replace the thermostat
Replace the element
5
EN