Table of Contents
Advertisement
UGO BASILE - I
02 =
post-meridian (p.m.) time
Once the TIME setting is complete, press the F4 (ENT) key to save the setting and go back to the
Main Menu.
Follow the same procedure to set the DATE, selecting now the F3 (DAT) key. Enter also the DAY
OF THE WEEK, referring to the following table:-
01 =
Monday
02 =
Tuesday
03 =
Wednesday
04 =
Thursday
05 =
Friday
06 =
Saturday
07 =
Sunday
Press the F4 (ENT) key to confirm the selection.
11.3
Display Contrast
To modify the display contrast, press the F2 (FNC) key from the Main Menu, then the F3
(DIS) key. The display shows:
Leave this software level, saving the selected display contrast, by pressing the F4 (ESC) key.
12
MAINTENANCE
While any service of the instrument is to be carried out by Ugo Basile personnel or by qualified
personnel, authorized by UGO BASILE organization, this section of the instruction manuals de-
scribes normal maintenance procedures which can be carried out at the customer's facilities.
UNPLUG THE MAINS CORD BEFORE CARRYING OUT ANY MAINTE-
NANCE JOB!
TALY
Keep the arrow keys F1 ( ↑ ) or F2 ( ↓ ) pressed until you
reach the desired display contrast.
The readability of the liquid crystal display depends on the
angle of view: select the ideal contrast according to the
height of the table, the operator's distance and so on.
Note that the display brightness can slightly change, dur-
ing the operation, due to variation of the instrument tem-
perature. Adjust it, if necessary.
Series 58000 Instruction Manual (Rev.1)
Page 28
Advertisement
Table of Contents
