Declaration Of Conformity Manufacturer Ce - Parkside PTB-16 Operation And Safety Notes

Disposal & Warranty / Declaration of conformity manufacturer CE
purpose, the used device can also
be handed over to a collection
facility that will see to its disposal
in the accordance with the
national circular economy and
waste disposal law. Not affected
are accessory parts and tools that
accompany used devices but
contain no electrical components.
Warranty
Read the warranty terms on the separately
enclosed warranty card.
7. DECLARATION OF
CONFORMITY MANUFACTURER
CE
We, Ferm BV, Lingenstraat 6, 8028 PM
Zwolle, The Netherlands, declare that the
product listed here is in conformity with
the following Community Directives and
harmonised standards:
Machinery Directive (98/37/EC)
Low Voltage Directive (2006/95/EC),
EMC Directive (2004/108/EC)
EN55014-1, EN55014-2, EN61000-3-2,
EN61000-3-3, EN61029-1
Model / Device designation:
Parkside Pillar Drill PTB-16
from 01-12-2008
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
J.F.J. Strikkers
Senior Quality Manager
Ferm BV
We reserve the right to technical
modifications in terms of continuous
improvement.
GB 15