Page 1
17,5 Kg max. : It is essential that the unit inside which the cabinet will be 69,5 fitted has an opening at the top, at the back, measuring at least 540mm in length and 50mm in width (see technical door diagram). www.eurocave.co.uk...
Page 2
On the side of the axis of rotation If your door is glazed, never place it on its side as it may Do not of the door, position it at least 3 mm break. obstruct from the adjacent unit. www.eurocave.co.uk...
Page 3
TECHNICAL DOOR ASSEMBLY 1) Remove the top hinge, fit the technical cross angle (support of the top technical hinge) on the top panel of the cellar (3 screws per side). 2) Fit the top technical hinge and tighten slightly the screws. 3) Remove the bottom hinge, install the support of the bottom technical hinge.
Page 4
TECHNICAL DOOR ASSEMBLY 57 Chiltern Street London W1U 6ND www.eurocave.co.uk Phone:+44 (0)20 7935 4679 email:info@eurocave.co.uk...
Page 5
TECHNICAL DOOR ASSEMBLY Wine cabinet Technical door Fitted door 84mm 60mm 60mm Clamp holes Hinge 25mm Mounting clamp Ref:059 Ref:059 726mm 676mm Ref:259 Ref:259 1709mm 1659mm 25mm 592mm 57 Chiltern Street London W1U 6ND www.eurocave.co.uk Phone:+44 (0)20 7935 4679 email:info@eurocave.co.uk...
Need help?
Do you have a question about the 059 and is the answer not in the manual?
Questions and answers