Do you have a question about the Première V166 and is the answer not in the manual?
Questions and answers
Noël Hamen
March 6, 2025
Pourquoi a l affichage il y a od
1 comments:
Mr. Anderson
March 6, 2025
The "OD" message appears on the display of the EuroCave Première V166 when the adjustment function is starting up. It indicates that the system is initializing, and the user should wait for the temperature to be displayed without pressing any control buttons or unplugging the appliance.
Page 1
Mode d’emploi - Gamme Première - V166 -V266 User Manual Première Range - V166 - V266 Gebrauchsanweisung - Reihe Première - V166 - V266 Modo de empleo - Gama Première - V166 - V266...
Page 3
The information contained in this document may be changed without warning. EuroCave offers no guarantee for this appliance when it is used for purposes other than those for which it was designed. EuroCave shall not be held responsible for any errors contained in this manual or for any damage linked to or resulting from the supply, performance or use of this appliance.
ELCOME TO THE WORLD OF Our biding desire is to accompany your enthusiasm for wine throughout the years… To do so, EuroCave puts all of its know-how into action to bring together the 6 essential factors in optimal wine maturing: Temperature: The two worst enemies of your wine are extreme temperatures and sudden fluctuations in temperature.
ONTENTS 1 • D p. 5 ESCRIPTION OF YOUR WINE CABINET 2 • I p. 6 MPORTANT SAFETY RECOMMENDATIONS 3 • E p. 6 LECTRICAL POWER SUPPLY 4 • C p. 6 ARE FOR THE ENVIRONMENT AND POWER SAVING 5 • I NSTALLING YOUR WINE CABINET l- Generalities p.
EuroCave dealer. Speak to your EuroCave dealer; he will explain all the collection and disposal resources that have been set up within the EuroCave network. In compliance with the legal provisions covering respect and care for the environment, your wine cabinets does not contain CFC.
- Open the door and check the integrity of the inside of your appliance (walls, shelves, hinges, control strip, etc.). - In the event of a problem, contact your EuroCave dealer. - Now move your cabinet to its chosen location. This location should: - be open to the exterior to enable air circulation (not a closed cupboard, etc.),...
Fig.B • Fit the 3 grommets. In case of solid door reversibility, remove the EuroCave plate and put it in the high position. If the plate is damaged, contact your EuroCave distributor to order a new one. • Wait 48 hours before plugging in.
– S AYOUT TORAGE Your EuroCave cabinet has been designed to be evolutionary. Depending on the model, it enables you to adapt it to your needs, and evolve in terms of storage: I - Various types of storage Magnum sliding...
6- L – S AYOUT TORAGE IV - Modification to cabinet layout To change the position of a storage shelf, first of all completely unload the shelf, and move the shelf supports taking care to re-attach them as shown opposite: Shelf support Wall...
If, however, after a few days, the problem persists, contact your EuroCave (or Around Wine) dealer. N.B: Only prolonged exposure to excessive temperatures or violent fluctuations in temperature will harm your fine ‘crus’.
PERATING ANOMALIES In the event of your cabinet not operating correctly, please contact your EuroCave wine cabinet retailer. - If the compressor does not start even though the desired temperature is lower (more than 2°C (36°F) than room temperature, check the wall socket by plugging in any type of electric appliance, and make sure that the display is correctly supplied with power (see button “U”...
Recommended temperature range Min.T°F Max.T°F V266 1744 V166 1444 * 24h consomption measured with a solid door and an ambient temperature of 25°C (77°F). Setting precision: +/- 1°C (2°F), Display precision: +/- 1°C (2°F). Data relating to energy consumption Annual energy Useful Energy efficiency...
Need help?
Do you have a question about the Première V166 and is the answer not in the manual?
Questions and answers
Pourquoi a l affichage il y a od
The "OD" message appears on the display of the EuroCave Première V166 when the adjustment function is starting up. It indicates that the system is initializing, and the user should wait for the temperature to be displayed without pressing any control buttons or unplugging the appliance.
This answer is automatically generated