Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SISTEM AIR Wolly 150
Summary of Contents for SISTEM AIR Wolly 150
- Page 2 INDEX General information The user guide Communications to the manufacturer Identification plate Technical Support Safety and security precautions THandling and unpacking Handling and transport Unpacking Control of accessories Description of the Central Vacuum Unit Operating principles and application field Allowed and improper use Basic Components Technical features Control panel description...
-
Page 3: General Informations
1 - GENERAL INFORMATIONS • 1.1 Utilising the user guide The user guide is a fundamental document written by the builder, to be considered an integral part of the central suction unit. We recommend storing and keeping the user guide throughout the whole operating life of the suction unit. The main purpose of the user guide is to provide a correct knowledge of the user mode in order to exploit the best performance and to maintain the central suction unit at its best working and security conditions. -
Page 4: Handling And Unpacking
• 1.5 Safety and security precautions Read carefully any information written in this user guide regarding installation, use and maintenance of the central vacuum unit. Never use inappropriately the central vacuum unit. Never let the children get near the central vacuum unit when it is working and never let the children play with the suction inlets or with the vacuum unit. - Page 5 • 2.2 Unpacking It is suggested not to unpack the central unit until you put it into service, in order to keep the central unit in perfect conditions. ATTENTION: The packing materials delivered with the central unit are inert solid wastes that must be disposed as per the regulations in force.
- Page 6 • 2.3 Check of the accessories N°1 x N°1 x N°1 x N°1 x N°1 x N°1 x N°1 x N°2 x N°1 x N°1 x N°1 x N°1 x N°1 x N°1 x N°2 x N°1 x N°1 x Wolly2 12/12-V01...
- Page 7 3 - DESCRIPTION OF THE CENTRAL VACUUM UNIT • 3.1 Operating principles The central suction system, suitable for any kind of residential building (house, office, hotels, service building) consists of a of PVC pipes network, under the floors, inside the walls or the false ceiling, spreading in the various rooms and with the suction inlets placed at the end of each sector.
- Page 8 • 3.3 Basic components External case Polystyrene sound absorbent covering Box to be walled Central main body Upper door Lower door Centering pins Frontal air discharge Identification plate Cap frontal air discharge Upper door Safety thermic feeler Motor sound absorbent cover Air ventilation Electric box Motor...
- Page 9 90.5 • 3.4 Technical features 176.5 90.5 • 3.5 Description of the control panel Upper cover (motor – electric panel) Lower cover (dust bag – safety filter) • Lower cover bag area: IMPORTANT! Don’t never use the unit wihout the cover, otherwise the unit suction capability would miss.
-
Page 10: Installation
4 - INSTALLATION - ATTENTION - THE FOLLOWING OPERATIONS MUST BE CARRIED OUT BY QUALIFIED STAFF • 4.1 Safeguards Here are some main rules to be followed in order to ensure a correct installation inside houses. Installation must foresee, upstream the central unit, a safety bipolar switch. •... - Page 11 • 4.7 Electrical connection - IMPORTANT - BEFORE CARRYING OUT ANY CONNECTION TURN OFF MAIN POWER SUPPLY.. - ATTENTION - INSTALLATION MUST BE CARRIED OUT EXCLUSIVELY BY QUALIFIED STAFF! Before connecting to the power supply verify that voltage corresponds to the one required by the central vacuum unit).
- Page 12 5 - HOW TO USE THE CENTRAL VACUUM UNIT • 5.1 Starting the central vacuum unit Verify that the unit is under tension. • 5.2 Use of the central vacuum unit Fit the appropriate cleaning accessory on the flexible hose. Starting To start the machine, open a suction inlet.
-
Page 13: Maintenance
6 - MAINTENANCE - ATTENTION - ALWAYS UNPLUG THE POWER SUPPLY CABLE FROM THE POWER SUPPLY SOCKET AND ALWAYS WEAR PROTECTION GLOVES AND GOGGLES BEFORE CARRYING OUT ANY TECHNICAL OR MAINTENANCE OPERATION • 6.1 Programmed maintenance According to the accumulated operating time of the central vacuum system, it is necessary to carry out maintenance operations in order to keep the central unit always well performing and to avoid serious mechanical problems. - Page 14 Gently remove the bag from the central unit. Throw the full bag Place the new bag ATTENTION: gently move back and forward the bag so to fit the bag membrane into its slot Reassemble the cover, verifying that the two tooths fit in to two seats of the unit.
- Page 15 • 6.3 Replacement of the filter cartidge - ATTENTION - NEVER USE THE CENTRAL UNIT WITHOUT THE FILTER CARTIDGE. Open the lower cover Remove the dust bag from the aspiration feed Unscrew the locking handle. Replace the filter cartridge Clean the passage area that is under the filter Reassemble dust bag and cover Wolly2 12/12-V01...
-
Page 16: Recommended Spare Parts
• 6.4 Cleaning the filter cartridge - ATTENTION- NEVER USE THE VACUUM UNIT WITHOUT THE FILTER CARTRIDGE BEFORE CARRYING OUT THE OPERATION DESCRIBED HEREUNDER, ALWAYS ASSEMBLE A NEW CARTRIDGE. The filter cartridge can be washed with water ATTENTION: before reassembling the filter make sure that it is completely Check if the surface of the cartridge is torn;... - Page 17 9 - DISMANTLING • 9.1 General instructions When dismantling the central suction system, dispose appropriately of used parts or material, which could endanger human health or well-being as well as the environment if handled improperly. You must be acquainted with sites/companies authorized to collect and dispose of used parts and materials. The disposal and/or recycling of any part of the suction system must be carried out in compliance with the legal regulations in force.
Need help?
Do you have a question about the Wolly 150 and is the answer not in the manual?
Questions and answers