Control panel and functions
Programme selector dial and
1
On/Off switch
2
Spin reduction button
3
Options button
4
Extra Rinse button
5
Display
6
Start/Pause button
7
Delay Start button
8
Indicator lights
6
The programme selector dial allows you to select a programme
●
and/or to switch the machine on/off. It can be turned either
clockwise or anticlockwise. The light of button
Press this button repeatedly to change the spin speed, if you
●
want your laundry to be spun at a speed different from the one
proposed by the washing machine or to select the Night Cycle
and Rinse Hold
By pressing this button, you can select only one of the following
●
option: Prewash, Intensive, Super Quick (see the relevant
chapter «Operating sequence»). The relevant light will light up.
By pressing this button, the machine performs some additional
●
rinses.
The display shows the following information: duration of the
●
selected programme, delayed start, incorrect option selection,
alarm codes, child lock activated, heating phase and end of
programme.
This button allows you to start the selected programme; the
●
corresponding green pilot light stops flashing.
This button also interrupts a programme which is running, the
●
corresponding green pilot light starts to flash.
By pressing this button the wash programme can be delayed
●
from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to
a maximum of 20 hours.
The different pilot lights illuminate depending on the running
●
programme phase:
6
starts to flash.
. The relevant light will light up.