Power Indicator; Firmware Version - Prime Controls FLUXIMITY DS71 Operating Instructions Manual

While Gauging
1. PROBLEM: The LED flashes red rapidly (10 Hz). The probe is either faulty or
disconnected. Check the cabling and probe.
2. The LED indicates the expected state of the outputs as follows:
LED State Single Output (pin2)
OFF OFF DS71 – low
GREEN ON
RED OFF DS71 – low
MULTI-FUNCTION
INDICATOR (RED,
GREEN, AMBER)

FIRMWARE VERSION

The format of the firmware version number is of the form 1.2, comprising a single digit
integer part and a single digit fractional part. When first powered up, the controller
displays the version number by flashing the integer digit value in red and the fractional
digit value in green. To determine the version number, count the number of red flashes
and then the number of green flashes immediately after power-up. For example, a
single flash of red followed by a single flash of green indicates a version number of 1.1.
DS72 – high
DS71 – high
DS72 – low
DS72 – high
9
No-Double Output (pin4)
ON DS71 high
DS72 low
ON DS71 – high
DS72 – low
OFF DS71 – low
DS72 – high
POWER
INDICATOR
(GREEN)