Switching On And Off; Before Using For The First Time; Connecting The Appliance; Operating The Appliance - Miele K 28202 D edt/cs Operating And Installation Instructions

Switching on and off

Before using for the first time

Packaging material
 Remove all packaging material from
the inside of the appliance.
Removing the protective film
The stainless steel trim on the door
shelves and adjustable shelves has a
layer of protective film to prevent dam-
age during transportation. The appli-
ance door, and side panels where ap-
plicable, have a layer of protective film
too.
 Do not remove the film until the refri-
geration appliance has been posi-
tioned in its final location.
Cleaning and care
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.

Connecting the appliance

 Connect the appliance to the electri-
city supply as described in "Electrical
connection".
18

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.

Switching on

 Touch the On/Off sensor.
The temperature display will light up
and show the current temperature in the
appliance.
If the word DEMO appears in the dis-
play, demo mode is active. Please call
Miele Service.
The appliance will start to cool and the
interior lighting will come on when the
appliance door is opened.