Advertisement
3. Specification
model no.................................................................Pfc101........................... Pfc201
lifting capacity Position 1.........................................1000kg.............................2000kg
lifting capacity Position 2...........................................900kg.............................1750kg
lifting capacity Position 3...........................................800kg.............................1500kg
lifting capacity Position 4...........................................700kg.............................1250kg
max. lift Ht. at max. Jib ext. Position 1...................2040mm...........................2160mm
max. lift Ht. at max. Jib ext. Position 2...................2100mm...........................2210mm
max. lift Ht. at max. Jib ext. Position 3...................2160mm...........................2280mm
max. lift Ht. at max. Jib ext. Position 4...................2210mm...........................2350mm
length of Jib Position 1.............................................960mm...........................1200mm
length of Jib Position 2...........................................1073mm...........................1336mm
length of Jib Position 3...........................................1187mm...........................1473mm
length of Jib Position 4...........................................1300mm...........................2350mm
Height Jib down......................................................1580mm...........................1740mm
length.....................................................................1480mm...........................1750mm
rear Width................................................................300mm.............................300mm
Width inside front frame..........................................860mm...........................1080mm
Width front frame.....................................................960mm...........................1180mm
Height legs folded..................................................1580mm...........................1740mm
Height of frame.........................................................112mm..............................150mm
Weight...........................................................................81kg................................145kg
oil capacity.................................................................530ml..............................1025ml
4.
oPeration
4.1.
it is essential to carry out the following assembly processes with the help of other people.
4.2.
Open the box and assemble the wheel brackets on the column (fig.2 / fig.3)
4.3.
Lift the crane and attach the hydraulic unit to the arm using the pin & circlips. (fig.4).
to assemble the legs, place the crane on the ground and introduce the rivet (9) and the screw
in the position indicated (fig.5).
4.4.
Attach the auxiliary wheel bracket with the pin and circlip (fig.6).
4.5.
Prior to using the crane, the hydraulic circuit needs to be bled in order to eliminate any
air from the system. turn the hydraulic release knob (19) 90º while pumping the lever (5)
several times. return the knob (19) to its original position,the crane is now ready for use.
turn the hydraulic unit to work in the most comfortable position.
4.6.
to lift the load, pump lever (5). if lifting an engine, secure it at the points recommended
by the manufacturer.
4.7.
to lower the load, turn the knob (5). this system enables the lowering to be regulated and
controlled manually and precisely. As another safety element, the crane is fitted with an LCS
system to avoid jerky lowering, resulting from a possible incorrect manoeuvre. the crane will
stop the lowering process when the knob is not activated.
4.8.
When the crane is not in use the slide should be moved to its minimum length,and the piston
of the hydraulic unit should be fully retracted.
© Jack sealey limited
fig.1
Original Language Version
fig.3
fig.4
fig.5
Pfc101, Pfc201 | issue 1 19/08/16
fig.2
fig.6
Advertisement
