Sealey FDT3.V2 Instructions

Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. saFeTy
Familiarise yourself with this products application and limitations, as well as the specific potential hazards attributed to the trestle.
9
Maintain the trestle in good condition.
9
Replace or repair damaged parts. Use recommended parts only. non authorised parts may be dangerous and will invalidate the
9
warranty.
Keep the trestle clean for best and safest performance.
9
locate the trestle in a suitable working area for its function, keep area clean, tidy, free from unrelated materials and ensure there is
9
adequate lighting.
ensure the workpiece is correctly secured on the trestle/trestles before commencing work activity.
9
Maintain correct balance and footing. ensure the floor is not slippery and wear non-slip steel toe-capped shoes/boots.
9
Keep children and unauthorised persons away from the working area.
9
do noT use the trestle for any purpose other than that for which it is designed.
8
do noT make any modifications to the trestle.
8
do noT operate the trestle if any parts are missing or if the "over centre" locking links are not in the correct positions.
8
do noT exceed the rated capacity of the trestle.
8
do noT stand on the trestle or use as a platform.
8
When not in use, stand or store in a safe, dry location.
9
warning! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that
‰
may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. inTroducTion
Manufactured from square section steel tube the trestle is ideal for supporting large/long workpieces when cutting, drilling etc. Trestle beam
has seven-position height adjustment and includes pivoted end stops to retain the workpiece. legs fold in for easy transportation and storage.
3. speciFicaTion
Model no: ................................................................FdT3.V2
Beam Width: .............................................................. 690mm
Capacity: ...................................................................... 200kg
Folded (W x d x H): ................................680 x 150 x 840mm
Height Adjustment: ............................................ 800-1300mm
Unfolded (W x d x H): .............................680 x 580 x 800mm
nett Weight: ..................................................................... 6kg
© Jack Sealey limited
Fold down Telescopic TresTle 200kg
capaciTy
Model no:
Wear protective Wear safety
gloves footwear
Original Language Version
FdT3.V2
FdT3.V2 Issue 3 (HF) 10/12/18