Changing The Default Settings - AEG MC 4448 DVD Instruction Manual

ENGLISH
58
Understanding the menu structure
Start the replay of photos by selecting the file from which the replay shall
Page 57 „Selecting file/directory and starting replay".
start
NOTE:
After a few seconds a preview picture appears on the right-hand side in
the two-column menu window.
Scrolling
K
Manual:
Press the or
to scroll forward or back.
K
Interrupt scrolling: Press the button (Fig. 3/11) in order to interrupt
the automatic picture change. Press the button again in order to
resume picture playback.
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
K
Mirror vertically: Cursor Button " "
K
Mirror horizontally:
Cursor Button " "
K
Rotate clockwise for 90°:
K
Rotate counter-clockwise for 90°:
Fading
During playback of images you can select from various fading effects by
repeatedly pressing the PROGRAM button (Fig. 3/13).

Changing the default settings

A large number of default settings can be comfortably changed via the
screen menu.
Press the SETUP -button (Fig. 3/26) on the remote control to start the
menu for changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote con-
trol and the menu. The difference is: If you change the default settings
via the remote control, these changes will only be valid until the DVD-
Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
K
Main menu:
The main level is represented by graphic symbols.
K
Sub-menu: The corresponding sub-menu options can be found under
each of the main menu options.
-button (Fig. 3/12) on the remote control
Cursor Button " "
Cursor Button " "