AEG MC 4448 DVD Instruction Manual page 53

Accessing a section via menu
Repeating DVD-title/chapter
Repeating track on CD
Repeating CD
Stopping repeat
Selecting a section to be repeated
The on-screen menu enables comfortable access to any sections of a
medium. To do this, proceed as follows:
1. Press the GOTO button (Fig. 3/5). The GOTO menu appears on the
screen.
2. Use the Cursor Buttons (Fig. 3/13) to move it to the desired subject
(e.g. "Chapter"). Then press the PLAY/ENTER button (Fig. 3/8).
3. Now move to the point from which the replay should start. Depend-
ing on the type of medium this may be a track number, a chapter or
even a point in time. The input must be made with the Numerical
Buttons (Fig. 3/3). Playback begins after a short time.
4. Press the GOTO button again to hide the menu.
1. Choose the chapter or title to be repeated.
2. Press the REPEAT-button (Fig. 3/22). The message "Chapter" appears
on the screen.
3. Press the REPEAT-button again, until the message "Title" or "All" is
displayed.
1. Select the track to be repeated.
2. Press the REPEAT-button (Fig. 3/22). The message "Track" appears on
the screen.
Keep pressing the REPEAT-button (Fig. 3/22), until the message "All" is
displayed on screen.
Press the REPEAT (Fig. 3/22) repeatedly until the message disappears from
the screen.
You can define a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 3/19) on the remote control once. The mes-
sage " A" appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B-button
on the remote control once again. The message "
the screen. The previously marked section is now repeated.
Press the A-B-button again to stop the repetition.
NOTE:
On MP3 CDs the section to be repeated must be within a track.
ENGLISH
53
A-B" appears on