AEG MC 4448 DVD Instruction Manual page 49

Fig. 2/23
Antenna connections
Fig. 2/24
Inputs on the Front
Fig. 1/10
Fig. 1/9
Switching on the receiver
Fig. 2/17
AUDIO IN Input
Connect the two audio leads for the right-hand and left-hand sound
channel to your output device.
1. Insert the audio plugs into the socket on the rear of the device.
2. Insert the audio plugs into the corresponding sockets of your output
device.
Antenna Input
This device has a built-in FM radio receiver.
K
FM reception:
Uncoil the antenna fully. If there is interference on the received sta-
tion, try to improve the reception as follows:
• By turning and coiling and uncoiling the antenna
• By changing the position of the antenna.
If the reception is poor, we recommend that you switch to mono.
USB Input
Insert a USB storage medium directly into the corresponding socket of
the device.
Insert memory card
Insert an MMC/SD or MS memory card into the card slot on the device.
Turn on the main switch of the DVD player by moving the „POWER"
on/off switch on the back of the device to „ON". If the device is then in
STANDBY button on the device (Fig. 1/2) or
standby mode, press the
on the remote control (Fig. 3/34) in order to switch the device on.
ENGLISH
49