Battery Change Of Wall Control; Battery Change Of Remote Control; Erasing Controls - Hornbach C800 Installation And User Manual

Battery change of
wall control
Remove cover inserting a small
screwdriver into the slot at the
bottom of the lid.
Insert a new C2032 battery
(+ side outwards) and reinstall
the lid.
Battery change of
remote control
Unscrew the three little screws
at the backside of the remote
control, take of the lid and insert
a new 8R932 battery. Please
observe the polarity.
Reinstall the lid.

Erasing controls

Press and hold the Code button,
the LED 1 turns on.
Release the button when LED 1
turns off . All remote controls are
now erased. This might become
necessary if a remote control
gets lost.
To pair controls again, see chap-
ter "Programming" section 3).
1.
1.
2.
3.
2.
ENGLISH | 215