Advertisement
MAINTENANCE
This section provides basic maintenance information including
battery and fuse replacement instruction.
Warning
Do not attempt to repair or service your Meter unless you
are qualified to do so and have the relevant calibration,
performance test, and service information.
To avoid electrical shock or damage to the Meter, do not get
water inside the case.
A. General Service
l Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
l To clean the terminals with cotton bar with detergent, as dirt
or moisture in the terminals can affect readings.
l Turn off the power of the Meter when it is not in use and take
out the battery when not using for a long time.
l
Take out the battery when it is using for a long time.
l Do not use or store the Meter in a place of humidity, high
temperature, explosive, inflammable and strong magnetic
field.
B. Testing the Fuses
Warning
To avoid electrical shock or personal injury, remove the test
leads and any input signals before replacing the battery or
fuse.
To prevent damage or injury, install ONLY replacement
fuses with identical amperage, voltage, and speed ratings.
To test the fuse:
1. Model DMM8060: Set the rotary switch to
and pressBLUE button to select
2. Plug a test lead into the terminalHzV and touch the probe
to the10A terminal.
.
31
Advertisement
