Instructions For Use (Instructions For The Effective And Safe Use Of The Machine) - EMAK Oleo-Mac MISTRAL 72/13 H Operators Instruction Book

the lever engagement/release operation must only
be carried out when the engine has stopped and the
parking brake is on.
6. INSTRUCTIONS FOR USE
Prohibited uses
WARNING: Use the machine solely for cutting grass in
gardens or parks. Any other use is considered
prohibited and shall void the warranty and
manufacturer's liability, leaving the user liable for
costs deriving from damage or injury to the user or to
others.
The following are also considered prohibited uses:
- Cutting or shredding branches or other materials tougher
than grass.
- Vacuuming or collecting tough materials, dust or waste of
any kind, leaves, sand or gravel from the ground.
- Flattening out divots or bumpy ground; the blade must
never touch the ground itself.
- Hitching tools or applications to the PTO that are not
specified by the manufacturer.
- Operating the blade on surfaces other than grass.
- Transporting other people, children or animals on the
machine or on a trailer.
- Using the machine:
1) for moving over wet or slippery areas or slopes,
2) on surfaces in the presence of holes, ditches, steps or stairs,
3) on surfaces with sudden changes in gradient, hidden
obstacles, sharp corners or ground-based metal grills.
Also check the consistency of the ground, particularly in the
presence of soft areas (e.g. freshly ploughed soil, marshy
ground and puddles) into which the wheels may suddenly
sink, throwing the machine off balance.
- Towing or pushing loads without the use of the specified
towing hitch.
WARNING: The machine may be used to tow certain
simple accessories of limited weight (see Accessories
chapter). Do not use the machine to tow objects or
accessories different from those specified by the
manufacturer; the towed objected may overturn,
resulting in injury to the operator and damage to
property. Towed objects alter the weight distribution
of the machine, which may itself over turn,
particularly when going up or downhill; when
braking, a trailer that is not fitted with brakes may
strike the machine, causing dangerous movements.
Pay special attention when towing accessories over
hard surfaces.
Precautions for use of the machine
WARNING: Do not tamper with or remove the safety
devices fitted on the machine. REMEMBER THAT THE
USER IS ALWAYS RESPONSIBLE FOR DAMAGE AND
INJURY CAUSED TO OTHERS.
Before using the machine:
- Read the general safety recommendations, paying
particular attention to driving and cutting on slopes,
- Carefully read the instructions for use, make sure you are
familiar with the controls and know how to stop the blade
and the engine quickly.
WARNING
- If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact your
dealer or an Authorised Service Centre. Avoid all usage
which you .consider to be beyond your capability.
- Do not use the machine unless you are able to call for
help in the event of an accident.
- Do not attempt to remove cut material while the engine
is running or the cutter assembly is rotating, as this can
result in serious injury.
- Sometimes branches or grass may get caught between
the speed adjustment pedals. Always stop the engine
before cleaning.
- Never leave the machine unattended with the engine
running or with the ignition key inserted. Always stop
the blade, engage the parking brake, switch off the
engine and remove the key. Stop the engine and
remove the ignition key before leaving the machine,
refuelling, carrying out maintenance work or cleaning
the machine.
- The ride-on mower is a product designed exclusively for
cutting grass. It is inadvisable to cut other types of
material. Any other usage not indicated in these
instructions may damage the machine and constitutes a
serious risk to people and property.
- Periodically check the condition and pressure of the
tyres; tyres that are in poor condition or inflated to an
incorrect pressure may affect the machine's weight
distribution and cause uneven grass cutting.
- The machine must under no circumstances be driven
on, or even across, public roadways.
- Never use the machine to tow or push other objects.
- Never open the side hatch of the cutting deck when the
engine is running; only attach the side discharge device
when the engine is switched off.
- Operate the machine only in daylight or well-lit conditions;
keep the machine a safe distance from holes and other
irregularities in the ground.
- Take great care when changing direction, especially when
working on slopes.
- Keep hands and feet well clear of the rotating blades.
- Never lift or transport the machine when the engine is
running.
- Slow down the engine before switching it off.
- Stop the machine if the blade strikes a foreign object.
Examine the unit and repair any damaged parts.
- Before starting the engine, make sure the cutter assembly is
not in contact with any object.
- Keep the steering wheel, levers and control pedals clean,
dry and free from traces of oil or fuel.
- Check the surrounding area for possible obstacles (roots,
rocks, branches, ditches, etc.).
- Be particularly cautious and alert while wearing hearing
protection because such equipment may restrict your
ability to hear sounds indicating danger (calls, signals,
warnings, etc.).
- Slow down before turning.
- Stop the blade when you are not cutting.
- Be careful when rounding fixed objects, so that the blades
do not hit them. Never drive over foreign objects.
GB
25