Spot Exposure - Leica DFC Series Manual

Spot Exposure

Leica DFC Cameras – Image Acquisition Guide
This feature allows you to draw a ROI in the live image
to set the exposure, and switches on auto-exposure
which is now only measured in the defined region.
 Draw a region and select Spot Exposure
Note that if you use Spot Exposure and move the
specimen, the exposure may not be appropriate!
 Check/uncheck Spot Exposure to activate (or
reselect) or stop , or
 click the Auto-Exposure button at the top of the
Control Panel
 You can set the ROI by right-clicking Spot Exposure
and selecting Set Rectangle – type the values for
position and size.
, to stop.
49