Changing The Opening Direction Of The Compartment Door; Technical Specification; Electrical Connection - Zanussi ZO 29 N Instruction Booklet

Changing the opening direction of
the compartment door
(Fig. 6) Fig. 6
Remove pin (1).
Remove the door. Pin (4) could drop out when this
4
operation is carried out; if so, it must be retrieved for
3
fitting on the opposite side.
Remove bush (5) and fit it on the opposite side.
Remove the catch (3) and fit it on the opposite side.
Fit pin (4) on the opposite side.
2
Reposition the door and insert pin (1), pressing it into
5
1
D164
place.
TECHNICAL SPECIFICATION
GB
The technical data is indicated in the rating plate on
the left side inside the appliance.

Electrical connection

Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by 6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
19