Changing The Opening Direction Of The Door; Changing The Opening Direction Of The Compartment Door - Zanussi ZFC 282 C Instruction Booklet

Changing the opening direction of the door

Unplug the appliance before performing the
following operations:
Remove the ventilation grille (D-Fig. 4).
Unscrew the bottom hinge (E-Fig. 4).
Remove the screws of the bracket with foot (I) and
levelling foot (H) and reassemble them on the
opposite side (Fig. 3).
Remove the door from the upper pivot (A-Fig. 5).
Remove the pivot and the washer (A+B-Fig. 5)
from the upper hinge (C), then mount these on the
opposite side.
Re-assemble the door.
Screw down the bottom hinge (E-Fig. 4) on the
opposite side, using the screws previously removed.
Detach the plug (F-Fig. 4) from the ventilation
grille (D). To do this, press it in the direction of the
arrow.
Insert the plug (G), which is supplied with the
appliance, into the hole left free on the opposite
side.
Re-assemble the ventilation grille.
Reverse the direction of the handle (Fig. 6).
Changing the opening direction of the
compartment door
(Fig. 7)
Remove pin (1).
Remove the door. Pin (4) could drop out when this
operation is carried out; if so, it must be retrieved
for fitting on the opposite side.
Remove bush (5) and fit it on the opposite side.
Remove the catch (3) and fit it on the opposite side.
Fit pin (4) on the opposite side.
Reposition the door and insert pin (1), pressing it
into place.
Warning
After having reversed the opening direction of the
door, check that the door gasket is adherent to the
cabinet.
If the ambient temperature is cold (i.e. in Winter),
the gasket may not fit perfectly to the cabinet. In
that case, wait for natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier.
H
I
D691
E
F
D
F
D432
D427
D162
3
2
5
D164
Fig. 3
Fig. 4
F
F
Fig. 5
C
B
A
Fig. 6
Fig. 7
4
1
13