Table of Contents
Advertisement
If this refrigerator featuring magnetic door seals is
to replace an older appliance having a spring lock
on the door or lid, be sure to make that spring lock
unusable before you discard the old appliance.
This will prevent it from becoming a death-trap
for a child.
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature between +18 C and +43 C (class T);
+18 C and +38 C (class ST); +16 C and +32 C (class
N); +10 C and +32 C (class SN).
The class of your appliance is shown on its rating
plate.
Make sure that there is nothing hindering air
circulation at the back, bottom, or top of the
appliance.
To achieve the best performance when the appliance
is set under a wall cabinet the top of the appliance
should be at least 5 mm away from the base of the
cabinet (Fig. 1/A).
However, the appliance should ideally not be installed
underneath wall cabinets (as shown in Fig. 1/B).
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
Rear spacers
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure 2.
Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.
16
INSTALLATION
A
NP007
PR153
Fig. 1
B
Fig. 2
GB
Advertisement
Table of Contents
