La Marzocco kb90 Series Manual page 41

Programming Mode Program Dose
Group Dose
Settings
Program
Volume Dose
Display
When the espresso machine is turned on, press and hold the T3 button
1
94.4 00:00
95.5 95.1 SB
After about 5 seconds the following screen is displayed.
2
Group Dose
Press the button T1
Settings
3
Program
Press the T3 button
Volume Dose
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed, the
Indicator remains lighted.
Operating Procedure
or T2 to display the following menu.
to start the doses programming procedure.
"Barista" Programming
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
to access the "Barista" programming.
41