Table of Contents
Advertisement
Nuvo-6108GC/ Nuvo-6108GC-IGN
3.
Align the HDD/ SSD to the preset screw holes (4 per drive) and secure the
drives onto the tray using flathead screws.
Use flathead screws to secure drive(s)
4.
Gently reinsert the tray back underneath the daughterboard while making sure
the clips on both sides of the tray that holds the tray in-place. Secure the tray by
screwing on the flathead screws removed in step 1.
5.
Reinstall the system enclosure
6.
If you need to install other components, please refer to respective sections.
Drive(s) secured on the tray
and panel when done.
66
Advertisement
Table of Contents
