Casio fx-9750G Operation, Service Manual & Parts List page 7

• To replace the memory back up battery
* Before replacing the memory back up battery, switch on the unit and check to see if the "Low battery!"
message appears on the display. If it does, replace the main power supply batteries before replacing the
back up power supply battery.
* Never remove the main power supply and the memory back up batteries from the unit at the same time.
* Be sure to replace the back up power supply battery at least once 2 years, regardless of how much you
use the unit during that time. Failure to do so can cause data in memory to be deleted.
1. Press to turn the calculator off.
SHIFT OFF
Warning!
Be sure to switch the unit off before replacing batteries. Replacing batteries with power on will cause data
in memory to be deleted.
2. Making sure that you do not accidently press the
the calculator over.
3. Remove the back cover from the calculator by pressing it in the direction indicated
by arrow 1, and then sliding it in the direction indicated by arrow 2.
4. Remove screw A on the back of the calculator, and remove the back up battery
compartment cover.
5. Remove the old battery.
6. Wipe off the surfaces of a new battery with a soft, dry cloth. Load it into the
calculator so that its positive (+) side is facing up.
7. Install the memory protection battery cover onto the calculator and secure it in
place with the screw. Next, replace the back cover.
8. Turn the calculator front side up and slide off its case. Next, press
power.
About the Auto Power Off Function
The calculator switches power off automatically if you do not perform any key
operation for about 6 minutes. To restore power, press
key, slide the case onto the calculator and then turn
AC/ON
to turn on
AC/ON
.
AC/ON
— 7 —
1
2
A