Performing Data Transfer Operation - Casio fx-9750G Operation, Service Manual & Parts List

Performing Data Transfer Operation

Connect the two units and then perform the following procedures.
Receiving unit
To set up the calculator to receive data, press
displayed.
(RECV)
F2
The calculator enters a data receive standby mode and waits for data to arrive. Actual data receive starts as
soon as data is sent from the sending unit.
Sending unit
To set up the calculator to send data, press
displayed.
(TRAN)
F1
Press the function key that corresponds to the type of data you want to send.
(SEL) ..... Selects data items and sends
F1
(CRNT) .. Selects data items from among previously selected data items and sends
F2
(BACK) .. All memory contents, including mode settings
F6
• To send selected data items
Press (SEL) or
F1 F2
(SEL) or
F1
(SEL)......Selects data item where cursor is located.
F1
(TRAN)...Sends selected data items.
F6
(CRNT) to display a data item selection screen.
(CRNT)
F2
Data items
(RECV) while the data communication main menu is
F2
(TRAN) while the data communication main menu is
F1
F1
F2
F1
— 11 —
F6
F6